Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorBahtli, Tuba
dc.contributor.authorBostanci, Veysel Murat
dc.contributor.authorBostanci, Derya Yeşim
dc.contributor.authorUlvan, Nesibe Sevde
dc.contributor.authorYasti, Serife Yalcin
dc.date.accessioned2025-12-28T17:03:18Z
dc.date.available2025-12-28T17:03:18Z
dc.date.issued2019
dc.identifier.issn2148-4171
dc.identifier.urihttps://doi.org/10.17350/HJSE19030000120
dc.identifier.urihttps://hdl.handle.net/20.500.12933/4056
dc.description.abstractIn this study, corrosion behaviours of MgO-C refractories by incorporating different binders as phenolic resin and pyrolytic liquid obtained by waste tire pyrolysis were investigated. Moreover, the effect of porosity on the corrosion resistance of those refractories according to types of binders was examined. The microstructures of corroded MgO-C refractories were characterized by Scanning Electron Microscopy SEM and Energy Dispersive X-Ray Analyser EDX . The results showed that K1 refractory produced with only phenolic resin had the lowest amount of porosity 1.37% and K2 refractory produced by the use of pyrolytic liquid had the highest amount of porosity 5.37% due to lower binder effect of pyrolytic liquid. According to the results, the refractories produced by the use of pyrolytic liquid had higher porosity and lower corrosion resistance than that of refractories produced by incorporation of phenolic resin as a binder.
dc.language.isoen
dc.publisherHitit Üniversitesi
dc.relation.ispartofHittite Journal of Science and Engineering
dc.rightsinfo:eu-repo/semantics/openAccess
dc.titleAn Investigation of the Effect of Pyrolytic Liquid Obtained From Waste Tire on the Corrosion Behaviours of MgO-C Refractories
dc.typeArticle
dc.departmentAfyonkarahisar Sağlık Bilimleri Üniversitesi
dc.identifier.doi10.17350/HJSE19030000120
dc.identifier.volume6
dc.identifier.issue1
dc.identifier.startpage45
dc.identifier.endpage49
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı
dc.department-tempNecmettin Erbakan University, Department of Metallurgical and Materials Engineering, Konya, Turkey Afyon Kocatepe University, Department of Chemical Engineering, Afyonkarahisar, Turkey Necmettin Erbakan University, Department of Mechanical Engineering, Konya, Turkey Necmettin Erbakan University, Department of Mechanical Engineering, Konya, Turkey Selcuk University, Department of Ceramic, Konya, Turkey
dc.snmzKA_DergiPark_20251227


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster