Advanced Search

Show simple item record

dc.contributor.authorÜnal, Osman
dc.contributor.authorUygunoğlu, Tayfun
dc.contributor.authorÇoşkun, Ufuk
dc.date.accessioned2025-12-28T17:02:40Z
dc.date.available2025-12-28T17:02:40Z
dc.date.issued2005
dc.identifier.issn1305-631X
dc.identifier.issn1305-631X
dc.identifier.urihttps://hdl.handle.net/20.500.12933/3761
dc.description.abstractBu çalışmada, agrega granulometrisi ve kimyasal katkının yüksek performanslı beton özelliklerine etkisi araştırılmıştır. Çalışmada, dört farklı tane boyutundaki agregalardan oluşan beş farklı granulometri seçilmiştir. Karışıma giren agregalardan doğal kum ve kırmataş-I oranları sabit, kırma kum ile kırmataş-II oranları değiştirilmiştir. Karışımlarında optimum su/çimento oranı 0.65 ve çimento miktarı 350 kg/m3 olarak belirlenerek, katkılı ve katkısız olmak üzere 10 farklı seri beton numuneleri üretilmiştir. Numuneler kalıptan alındıktan sonra 7, 28 ve 56 gün süreyle suda kür edilmiştir. Numuneler üzerinde, birim hacim ağırlığı, ultrases geçiş süresi ve basınç dayanımı deneyleri yapılmıştır. Elde edilen sonuçlara göre, agrega granulometrisinin betonun özellikle basınç dayanımı üzerine etkisinin fazla olduğu belirlenmiştir. Ayrıca taze betonun işlenebilirliğini kolaylaştırmak amacıyla hazır beton santrallerinde kimyasal katkının kullanılmasının gerekli olduğu görülmüştür.
dc.description.abstractIn this study, effect of aggregate granulometry and chemical admixtures on the properties of high performance concrete were investigated. In the study, five different aggregates granulometry which are formed by four different grain sizes were selected. From aggregates, added in the mix, ratio of natural sand and crushed stone-I were kept, ratio of crushed sand and crushed stone-II were changed. Optimum water/cement and cement content were defined as 0.65 and 350 kg/m3 respectively, in the mixes. Ten different concrete series were produced as with and without admixtures. Specimens were cured in water at 7, 28 and 56 ages after demould. On the specimens, unit weight, ultrasınic velocity and and compressive strength were tested. According to results obtained from the study, it was defined that the aggregate granulometry is more effect on the compressive strength. Furthermore, it was obtained that use of chemical admixture is necessary for facilite to workability of concrete produced in ready mix site.
dc.language.isotr
dc.publisherSedat ÇETİN
dc.relation.ispartofElectronic Journal of Construction Technologies
dc.rightsinfo:eu-repo/semantics/openAccess
dc.titleAgrega Granülometrisinin Yüksek Performanslı Beton Özelliklerine Etkisi
dc.title.alternativeThe Effect of Aggregate Granulometry On High Performance Concrete
dc.typeArticle
dc.departmentAfyonkarahisar Sağlık Bilimleri Üniversitesi
dc.identifier.volume1
dc.identifier.issue2
dc.identifier.startpage13
dc.identifier.endpage20
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı
dc.department-tempAfyon Kocatepe Üniversitesi, Teknik Eğitim Fakültesi, Yapı Eğitimi Bölümü, Afyonkarahisar, Türkiye Afyon Kocatepe Üniversitesi, Teknik Eğitim Fakültesi, Yapı Eğitimi Bölümü, Afyonkarahisar, Türkiye TÜMTAŞ Hazır Beton, Afyonkarahisar
dc.snmzKA_DergiPark_20251227


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record